Product Category

Product details

Greenlogy TEC

  Pultruded FRP grating is made by using pultruded "I"-shaped and "T"-shaped profiles as load-bearing bars and solid tubes or rods as connecting rods, assembled through a specific assembly process, with gaps left between the panel joints.  

Name

Content

Type

Resin

25%

OFR-25,IFR-25,VEFR-25

Glass fiber

65%

E

Filler

8%

ATH,PR

Other

2%

---

Raw material introduction 
Resin type

Code

Resin type

Flame retardancy

Recommended applications

MP-5

Phenolic type

Oxygen index up to about 80

Low toxicity and high flame retardancy; applications with very high fire safety requirements

VEFR-25

Vinyl ester type

Oxygen index 28 and above

Harsh environments with strong acid and alkali corrosion

VEFR-10

Vinyl ester type

Oxygen index 35 and above

Applications requiring high flame retardancy and resistance to strong acid and alkali corrosion

IFR-25

Isophthalic resin

Oxygen index 28 and above

VEFR economical type, good performance, resistant to moderate acids, alkalis and solvents

IFGR-30

Styrene-based (benzene-type) resin, food grade

Oxygen index 26

Mainly used for meat products and food processing plants

OFR-25

Orthophthalic type

Oxygen index 28 and above

General acid and alkali environments

OCR

Orthophthalic type

Oxygen index below 28

OFR-25 economical type, no flame-retardant requirement

Coarse glass fiber type selection  

Code

Coarse glass fiber type

Recommended applications

E

Alkali-free glass (E-glass)

For applications requiring high strength and high corrosion resistance

Selected filler type 

Code

Filler type

Recommended applications

ATH

Aluminum hydroxide

Flame-retardant, smoke-suppressing and corrosion-resistant applications

PR

No filler, pure resin

For high corrosion resistance applications

Grit surface

Smooth surface

Anti-slip grooved surface

Standard panel size:
1220mm, 915mm wide; 3050mm, 6100mm long
Load-bearing bar: 50mm
Open area: 60%

Approx. weight (incl. three-core strand): 43.5kg/m²

Line load (unit: mm)

Spacing

kg/m

kg/m

kg/m

kg/m

kg/m

kg/m

kg/m

kg/m

kg/m

(mm)

15030045075015003000450060007500
6000.050.10.130.230.460.891.351.782.24
7500.080.150.250.40.811.632.443.284.09
9000.130.280.410.691.372.744.095.466.83
12000.330.640.971.63.26.49.612.816

Uniform load (unit: mm)

Spacing

kg/m²

kg/m²

kg/m²

kg/m²

kg/m²

kg/m²

kg/m²

kg/m²

kg/m²

(mm)

4509501450245048509800145001950024400
6000.050.10.180.280.561.121.682.242.77
7500.130.250.380.641.272.553.845.116.38
9000.250.510.761.272.575.137.6710.212.8
12000.811.62.414.01816---------

Features:

  • Flame retardant

  • High fire resistance

  • Low smoke and low toxicity emissions

  • High strength-to-weight ratio

  • Corrosion resistant

  • Low maintenance

  • Anti-slip

  • Non-conductive and non-heat-conductive

  • Easy to process

  • Impact resistant 

  • UV resistant

  • Maintenance-free

Installation & Accessories


Application Scenarios

Pultruded grating is assembled using pultruded "I" and "T" profiles as load-bearing bars and solid tubes or rods as connecting rods. It is suitable for platforms, walkways, trench covers and equipment operating surfaces that require load-bearing capacity, corrosion resistance and flame retardancy. Different resin systems suit different service conditions; for specific selection, please contact us to confirm based on your actual working conditions.

Selection Guide

Selection mainly depends on media corrosiveness, load-bearing requirements and fire protection requirements: phenolic types have a high oxygen index and are suitable for applications with high requirements for low toxicity, high flame retardancy and fire safety; vinyl ester types offer good corrosion resistance and are suitable for common acid and alkali environments. Welcome to contact us for detailed specifications and quotations; we will help match the resin type and grating structure.

Product Advantages

Assembled from pultruded profiles, the panels are lightweight, high-strength, corrosion-resistant and easy to cut and install on site, reducing later maintenance. The open-gap structure between profiles and connecting rods accommodates both load bearing and drainage and ventilation, making it suitable for a variety of industrial environments.

Inquiry Guide

For specific information on the size, resin type, load bearing and delivery time of pultruded grating HL-6020, please contact us. We will provide detailed specifications and quotations based on your working conditions.

Service Environment

  • Pultruded FRP grating HL-6020 uses pultruded I-type and T-type load-bearing bars as its framework, connected with solid tubes or solid rods as connecting rods. This structure is suitable for walking surfaces where steel materials would corrode.
  • The phenolic MP-5 resin option is formulated for low-toxicity, high-flame-retardancy applications and is suitable for indoor and outdoor locations with fire safety requirements.
  • The vinyl ester and other resin systems in the series are selected for service conditions involving long-term exposure to damp, chemical-containing or other corrosive environments.
  • Typical application locations include platform walkways, stair treads and inspection covers in industrial plants; please contact us and provide your site conditions to obtain the complete parameter table.